Product Overview
BendPak APEX AL10C Clearfloor 2 Post Lift 10,000 lbs
Two-Post Car Lift / 10,000 Lb. Capacity / Clearfloor
The APEX AL10C is a 10,000-lb clearfloor two-post lift built for shops that require maximum under-vehicle access, heavy-duty durability, and dependable long-term performance. Designed with a direct-drive hydraulic lifting system, reinforced overhead box-beam construction, and integrated advanced safety features, the AL10C delivers smooth, consistent lifting across a wide range of vehicles.
Clearfloor Design for Maximum Shop Efficiency
The APEX AL10C is built for professional shops and serious home garages that demand unrestricted movement beneath the vehicle. Its clearfloor design eliminates the traditional floor beam found on standard two-post lifts, allowing transmission jacks, oil drains, tool carts, and other essential shop equipment to roll freely without obstruction.
This open, unobstructed workspace enhances efficiency, reduces clutter, and streamlines workflow—making it easier to service everything from low-profile performance vehicles to lifted trucks and SUVs. With a 10,000-lb lifting capacity, the AL10C provides the strength required for today’s heavier vehicles while maintaining outstanding accessibility and productivity in the bay.
Flexible Arm Geometry for Faster Vehicle Positioning
Correct vehicle positioning on a 10,000 lb two-post lift is critical for shop efficiency, and the APEX AL10C is engineered to make setup faster and more precise. Featuring dual symmetric and asymmetric arm configurations, this clearfloor two-post lift allows technicians to position lift arms exactly where needed for optimal balance and safe load distribution.
Triple-telescoping front arms and extended dual-stage rear arms provide exceptional reach, making it easy to accommodate a wide range of wheelbases—from compact cars and sports cars to trucks and SUVs. Double-telescoping screw pads combined with a 4-piece 63 mm stackable adapter set ensure secure frame contact across various vehicle designs, improving stability and reducing setup time in busy automotive shops.
Direct-Drive Hydraulic Lifting System for Smooth Performance
Unlike many clearfloor car lifts that rely on complex chain-over mechanisms, the APEX AL10C features a direct-drive hydraulic lifting system with dual full-stroke cylinders. This streamlined design reduces the number of moving components, minimizing wear while delivering smooth, consistent lifting performance.
The result is lower maintenance requirements, quieter operation, and enhanced long-term reliability—making this 10K two-post lift ideal for high-volume professional repair facilities and serious home garages.
Engineered for Safety and Structural Stability
Safety is integrated into every aspect of the APEX AL10C automotive lift. Automatic safety locks engage every three inches throughout the lifting range, providing secure load holding at virtually any working height. Single-pull lanyards on each carriage allow for quick, controlled lock release during lowering.
A reinforced overhead box-beam structure strengthens the clearfloor frame design, reducing column deflection and improving overall lift stability. A padded overhead shutoff bar with an industrial-grade limit switch automatically halts upward travel if a vehicle is raised too high, protecting both the vehicle and the shop environment. Automatic arm restraints engage as the lift rises, preventing unintended arm movement during service.
Heavy-Duty Construction for Professional Shop Environments
Built for daily use in demanding automotive service bays, the AL10C two-post lift features a heavy-duty 6" x 6" tubular steel carriage for superior load-bearing strength. Oversized 20.5” x 15.5” base plates evenly distribute weight across the shop floor, delivering rock-solid stability.
Self-lubricating UHMW polyethylene guide blocks reduce friction and eliminate frequent greasing, while oversized cable sheaves and aircraft-grade equalizer cables minimize fatigue and extend service life. This durable construction makes the AL10C a dependable 10,000 lb car lift for professional technicians.
When you invest in the APEX AL10C, you're backed by BendPak's industry-leading 36-month warranty, covering structural components and craftsmanship. With BendPak's renowned customer support and a nationwide network of service providers, expert assistance is always within reach.
California Residents:
WARNING: Proposition 65 requires warnings on products that contain certain metals/chemicals that the State of California has determined may cause cancer and/or birth defects or other reproductive harm, if those products expose consumers to such chemicals above certain threshold levels that are designed to protect public health. For more information go to
Product Features
- 10,000-lb Lifting Capacity Supports a wide range of passenger vehicles, performance cars, and light trucks
- Clearfloor Two-Post Design Provides unobstructed access beneath the vehicle for improved workflow
- Direct-Drive Dual Hydraulic Cylinders Reduce moving parts while delivering smooth, consistent lifting performance
- Rugged Overhead Box-Beam Construction Enhances structural stability and reduces column stress
- Padded Overhead Safety Shutoff Bar Automatically stops lift travel if a vehicle is raised too high
- Symmetric and Asymmetric Arm Configurations Allows fast, flexible vehicle positioning
- Triple-Telescoping Front Arms and Extended Rear Arms Accommodates a wide range of wheelbases and frame designs
- Automatic Safety Locks Every 3 Inches Ensures secure load holding throughout the lift range
- Automatic Arm Restraints Prevent unintended arm movement during service
- 36-Month Limited Warranty Industry-leading coverage backed by BendPak support
Product Specifications
Model
GP-10C
Capacity
Lifting Capacity: (*)
10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle
5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle
5,000 lbs. (2,268 kg)
Outside Dimensions
A Height Overall
148" (3,759 mm)
B Width Overall (at Baseplate)
137.5" (3,492 mm)
C Width Outside of Columns
128.5" (3,264 mm)
D Floor to Overhead Switch Bar
142.5" (3,619 mm)
Inside Dimensions
E Width Inside Columns
114.5" (2,908 mm)
K Drive-Thru Clearance
103" (2,618 mm)
Arms & Pads
F Min Front Arm Reach
22.5" (571 mm)
F Max Front Arm Reach
43.25" (1,099 mm)
G Min Rear Arm Reach
33.5" (845 mm)
G Max Rear Arm Reach
53.25" (1,353 mm)
H Min. Pad Height
3.9" (100 mm)
Rise
I Rise Height
70" (1,778 mm)
J Max. Lift Height (Pad + 63mm Adapt.)
76.5" – 78.5" (1,943 – 1,994 mm)
Screw Pad Adjustment
2" (51 mm)
Max. Load Per Arm
2,500 lbs. (1,134 kg)
Time to Full Rise
65 seconds
Power & Weight
Motor
220 VAC / 60Hz / 1 Ph
Shipping Weight
1,545 lbs. (703 kg)
The design, material and specifications are subject to change without notice.
Key Features
- Published product configuration: BendPak APEX AL10C Clearfloor 2 Post Lift 10,000 lbs Two-Post Car Lift / 10,000 Lb. Capacity / Clearfloor The APEX AL10C is a 10,000-lb clearfloor two-post lift built for shops that require maximum under-vehicle access, heavy-duty durability, and dependable long-term performance. Designed with a direct-drive hydraulic
- Exact manufacturer model or part number: 5176251
- Cataloged for Lifts & Hoists: Car Lifts — 2 Post Lifts
- 2 product manual or technical documents linked below
- Condition: New
Product Specifications
| Brand | Apex |
|---|---|
| SKU | 5176251 |
| MPN / Model | 5176251 |
| Condition | New |
| Division | Lifts & Hoists |
| Primary Category | Car Lifts |
| Collection | 2 Post Lifts |
Before You Order
Confirm that model 5176251, the listed capacity or working range, power requirements, dimensions, and site-delivery needs match your application. Only specifications stated in this listing should be used for purchase planning.
Manuals & Technical Resources
Need more technical details or compatibility information? Contact our team and we will help you find the right fit.
