Product Overview
BendPak PCL-18B-6 18,000 lb. per Portable Column Lift (Set of 6) – New Gray
The BendPak PCL-18B Series sets a new benchmark in heavy-duty mobile column lift design. With evolutionary advancements in ergonomics, power, safety, durability, and performance, these portable column lifts are engineered exclusively for the most demanding fleet service applications. Whether you're working on light trucks or massive three-axle vehicles, the PCL-18B-6 provides the lifting capacity, flexibility, and reliability you need to keep your operation running at peak efficiency.
Portable and surface-mounted, the PCL-18B requires no excavation or costly site preparation. Set up is fast, relocation is simple, and the system is ready to lift a wide range of vehicles—from light-duty trucks to the heaviest two- and three-axle vehicles up to 108,000 lbs. with varied axle or wheelbase lengths. The PCL-18B Series provides limitless lift cycles, safer and easier operation, and more productivity-enhancing features than any competitive system in its class.
Designed with a super-efficient three-phase power system and a simplistic yet rugged construction, the PCL-18B minimizes scheduled service requirements and reduces long-term operating costs. Never before has a series of portable column lifts delivered so much power and versatility for both indoor and outdoor applications.*
The Perfect Fit for Your Heavy-Duty Maintenance Facility
Built for professionals who demand the best, the PCL-18B is the ideal solution for municipal fleets, commercial truck service centers, transit agencies, and heavy equipment maintenance facilities. Its user-friendly design reduces operator fatigue and setup time, allowing your technicians to get vehicles in the air and back on the road faster than ever before.
Unlike battery-powered systems that require constant recharging, the PCL-18B uses an energy-efficient on-demand electric-hydraulic power system that's ready to work around the clock. This means measurably longer work cycles, reduced downtime, and maximum productivity—shift after shift, day after day.
Each column features ergonomic steering control with a built-in hydraulic jack that elevates the lift assembly in seconds. A familiar 180-degree pallet-jack-style handle provides exceptional maneuverability in compact areas, and tandem 8" diameter polyurethane-covered steel wheels with sealed roller bearings easily roll over dirt, debris, and uneven surfaces. With just three strokes of the handle, the lift column is raised off the floor for instant portability. Once positioned, the spring-loaded handle returns automatically to the upright position. An overload bypass valve protects the steering control unit if the column is raised with wheels elevated. *Outdoor use only if covered and dry.
Horseshoe Wiring Design for Maximum Access
For a standard four-column set, the PCL-18B uses just three 30' control cables (as opposed to four like other brands), so the front or back of the lift is always accessible and free of cable obstruction. This innovative horseshoe wiring configuration saves valuable time by allowing vehicles to be driven in and out of the work area without disconnecting and reconnecting cables. It's a simple detail that makes a huge difference in daily productivity.
Powerful and Reliable Hydraulic Design
The PCL-18B features low-pressure HVLP direct-drive cylinders that eliminate the need for lifting chains or expensive-to-maintain screw-drive systems. Inverted hydraulic cylinders protect the chrome piston rods from debris and damage at all times, extending service life and reducing maintenance costs substantially.
Independent self-contained electric-hydraulic power units (one per column) are fast, smooth, and reliable. Each unit includes a motor, gear pump, reservoir, internal valving, a load hold check valve, and a pressure relief circuit in a reliable yet easily serviceable assembly. An enclosed electric-hydraulic power system ensures quieter operation, making it better suited for sound-sensitive areas.
Manual safety override valves on each column permit the lift to be lowered in the event of a power outage—no manual hand cranks required. Inverted hydraulic cylinders feature an integrated safety valve to prevent accidental uncontrolled lowering in the event of oil pressure loss. Multiple, automatic, independent safety locks spaced every 4 inches ensure safe operation at all times.
Industry-Best Mobility
Six-inch diameter Cush-Ride™ front wheels feature an adjustable active leaf spring design that provides variable up-front ground clearance for smooth traveling over uneven floors, deteriorating asphalt, expansion seams, and thresholds. You set the front wheel ride-height to whatever setting best suits your conditions.
Turn the adjusting screw to the max setting and the front legs rise nearly three inches off the ground to facilitate roll-on/roll-off loading of trailers and rollback trucks or to make easy passage of drainage gutters or floor irregularities. During operation, the front wheels automatically compress and settle down, providing firm, stable support for the lift column.
Low-mounted power units and cylinders mean a lower center of gravity, making the columns easier to move and less likely to topple compared to screw-drive systems with heavy overhead motors and drive systems. A space-saving design, reduced column weight, and a tight 40" turning radius provide improved mobility. Durable forklift pockets provide simplistic handling when moving the lift columns from one facility to another.
Intelligent Push-Button Controls
Operator convenience is a key parameter in the design of the PCL-18B. The PLC-based control system is operated by means of intuitive push-button controls for continuous synchronization of all columns. All operator instructions, symbols, and warnings are printed in clear text and are easy to understand.
The PCL-18B allows you to operate, view, and change operation parameters directly from each individual full-control panel. Intuitive controls allow the lift to be fully programmed and controlled from any column. Control systems feature 24-volt safety circuitry. Each column is equipped with a warning light and audible alarm for critical warning alerts. Emergency shut-off switches on each column quickly shut off power to the lift in the event an unsafe condition is detected by the operator. Separate key lock enclosures on each column ensure secure access. Electronics are multi-fuse protected.
Smart Electronics with Self-Diagnostics
Smart electronics feature self-diagnostics and self-calibration functions. If a system error is detected or if the life of a consumable part is nearly expired, fault code indicators are instantly lighted. This allows the user and service coordinator to take appropriate action. If critical faults are detected, all operation functions will be disabled until the affected condition is corrected.
Sealed and enclosed linear potentiometers feature precision potentiometric output and high-frequency response for precise synchronization and communication of all columns throughout all operation cycles, ensuring precise, level lifting. Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle service requirements necessitate specific rise heights.
Off-the-Shelf Componentry for Easy Service
A Direct Logic™ PLC (Programmable Logic Control) and other off-the-shelf components from top-tier hardware manufacturers control operation functions and column synchronization. The PLC and main system components are standard off-the-shelf brands rather than proprietary printed circuit boards or controls, which can be very expensive to service or replace.
Other lift systems may use dedicated proprietary printed circuit boards specific to that brand, which can be very expensive should replacement ever be needed—if and when available. All control system hardware conforms to CE, CSA, ANSI, ASME, OSHA, and UL regulations.
Standard Operation Functions
TEAM, PAIR, OR SINGLE COLUMN OPERATION selects which lift columns will operate as a group, tandem, or individually. Single mode results in commands from specific lift columns; team and pair modes result in commands from any column designated in their respective group.
UP CONTROL initiates the lift rise sequence. Automatic synchronization via auto-level corrections is made throughout all operations in addition to inadvertent loss of motion detection.
DOWN CONTROL initiates the lift lowering sequence. If the lift is parked on the locks, the lift will first automatically rise slightly to clear the locks before descending. If the lift is not parked on the locks, the lift will descend immediately with no initial upward movement. During the lowering sequence, the lift will initially descend at a slowed (turtle) speed, and then automatically initiate to full (rabbit) speed after a short delay. Automatic synchronization via auto-level corrections is made throughout all operations in addition to inadvertent loss of motion detection.
ULTIMATE LEVEL ERROR makes sure that if for any reason the lift operation exceeds a specified out-of-level tolerance threshold, all lift columns will stop and display an out-of-level tolerance error. To clear the error, an offending lift would be put in SINGLE mode and raised or lowered accordingly to reduce the difference in lift heights.
PARK CONTROL initiates the lift locking (parking) sequence. Each lift column will slowly settle onto the mechanical stops.
TWO-SPEED OPERATION means parking and lowering speeds are controlled by you. When trying to settle a bus on tall jack stands, go ahead and opt for the slower "turtle" speed for a safe, controlled descent; when the job's done and it's time to remove the vehicle from the work area, select the faster "rabbit" speed for a rapid controlled descent.
EMERGENCY STOP shut-off switches on each column quickly shut off power to the lift in the event an unsafe condition is detected by the operator.
Designed and Assembled in USA
At BendPak, we make every effort to use USA-sourced components and engineering for our products. Product development, assembly, testing, and packaging of all PCL-18B lifts is undertaken at our manufacturing facility in Santa Paula, California.
Key Selling Points
- 108,000 lbs. total system capacity with six columns (18,000 lbs. per column)
- Meets or exceeds ANSI/ALI ALCTV-2011 standards and is ALI Certified
- Horseshoe wiring design uses just three 30' cables for four-column sets, leaving front or back clear of obstructions
- On-demand electric-hydraulic power system requires no recharging for around-the-clock operation
- Ergonomic pallet-jack-style steering with built-in hydraulic jack for effortless mobility and setup
- Inverted hydraulic cylinders protect chrome rods from debris and damage, reducing maintenance costs
- Off-the-shelf PLC and components ensure easy, affordable service and parts availability
- Smart electronics with self-diagnostics and fault code indicators for proactive maintenance
- Two-speed operation with turtle or rabbit speed settings for controlled descent
- Multi-width wheel forks with locking pins accommodate the widest range of wheels without specialty adapters
- Adjustable Cush-Ride front wheels provide variable ground clearance for uneven surfaces and thresholds
- Designed and assembled in USA at BendPak's facility in Santa Paula, California
Exceptional After-Sale Service and Support
We're more than just a lift company; we're a dedicated and highly focused team of experts whose primary commitment is to provide our customers with the best possible after-the-sale service available. Our award-winning Certified Service™ program is how we keep those customers smiling long after the initial purchase of their garage equipment product. When the unexpected happens, BendPak Certified Service™ is your first and final step towards making it right. Even though our business starts with a quality, cost-effective product, we understand that it is the support and services we provide after the sale that help keep your business running at peak efficiency.
Watch the PCL-18B in Action
Product Features
- Sets of 6 Columns 108,000 Total Capcity
- Available in sets of 2 – PC8L-18B-2 36,000 lbs, 6 – PC8L-18B-6 108,000lbs or 8 – PCL-18B-8 144,000 lbs
- 18,000-lb. individual column capacity; 108,000-lb. maximum system capacity
- Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
- Two, four, or six column configurations can accommodate heavy duty trucks and light duty passenger vehicles
- 208-240 volt, 3-phase main power system – optional voltages available upon request
- SINGLE, PAIR or TEAM operation,
- For a standard four-column set, just three 30' cables are used leaving the front or back of the lift clear of cable obstructions
- Simple operation, long service life and minimum maintenance
- Intuitive controls allow the lift to be fully programmed and controlled from any column
- Control systems feature 24-volt safety circuitry
- The PLC and main system components are standard off-the-shelf brands rather than proprietary printed circuit boards or controls which can be very expensive to service or replace
- Smart electronics feature self-diagnostics and self-calibration functions
- Sealed and enclosed linear potentiometers feature precision potentiometric output and high frequency response for precise synchronization and communication of all columns throughout all operation cycles for precise, level lifting
- Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle service requirements necessitate specific rise heights
- Two-speed lowering option – turtle or rabbit speed settings
- Each column is equipped with a warning light and audible alarm for critical warning alerts
- Emergency shut off switches on each column quickly shut off power to the lift in the event an unsafe condition is detected by the operator
- Separate key lock enclosure on each column
- Electronics are multi-fuse protected
- An enclosed electric-hydraulic power system that ensures quieter operation is better suited for sound-sensitive areas
- Pallet-jack style steering wheels enable the columns to be lowered firmly on the floor vs. constantly loaded spring-type steering wheels that can cause columns to roll when unladen with the weight of a vehicle
- Low mounted power units and cylinders means a lower center of gravity making the columns easier to move and less likely to topple vs. screw-drive systems with heavy overhead motors and drive systems
- Extended forks accommodate wide tires and deep wheel configurations
- Multi-width wheel forks with locking pins accommodate the widest range of wheels eliminating the need for specialty wheel adapters
- Tandem 8” diameter polyurethane covered steel wheels with sealed roller bearings easily roll over dirt and debris
- Heavy-duty steel carriage rollers feature turned, ground and polished axle pins
- Manual safety override valves on each column permit the lift to be lowered in the event of a power outage without the need for manual hand cranks
- Durable forklift pockets provide simplistic handling when moving the lift columns from once facility to another
- Inverted hydraulic cylinders feature an integrated safety valve to prevent accidental uncontrolled lowering in the event of oil pressure loss
- Multiple, automatic, independent safety locks spaced every 4 inches ensure safe operation
- Space-saving design, reduced column weight and a tight turning radius provides improved mobility
- Use the lift to place vehicles on tall jack stands then use the columns to raise another vehicle in an adjoining bay
- Durable powder-coat finish
Product Specifications
Specifications
PCL-18B-2
PCL-18B-4
PCL-18B-6
PCL-18B-8
Set of 2
Set of 4
Set of 6
Set of 8
Capacity
Max Column Capacity
18,000 lbs. / 8,165 kg (ea)
Total Capacity (lbs.)
36,000
72,000
108,000
144,000
Column Specs
A Overall Height (Raised)
101” (2,565 mm)
B Overall Height (Lowered)
146.5” (3,721 mm)
C Max Lifting Height
71.5” (1,889 mm)
D Overall Depth
48.75” (1,238 mm)
E Overall Width
45” (1,143 mm)/center>
C Chassis Length
32.25” (819 mm)
G Min Lifting Fork Width
9.5” (241 mm)
H Max Lifting Fork Width
35” (889 mm)
I Lifting Fork Length
11.5” (292 mm)
Turning Circle
40" (1,016 mm)
Column Weight
Each 1,450 lbs. (657 Kg)
Lifting Speed
85 sec
Motor
208 V – 240 V / 50 Hz – 60 Hz / 3 Ph
Shipping
Shipping Weight
1,450 lbs. / 657 kg (Ea. Column)
Shipping Dimensions
106" x 55" x 41" (Ea. Column)
(2,696 x 1,397 x 1,041 mm)
Key Features
- Published product configuration: BendPak PCL-18B-6 18,000 lb. per Portable Column Lift (Set of 6) – New Gray The BendPak PCL-18B Series sets a new benchmark in heavy-duty mobile column lift design. With evolutionary advancements in ergonomics, power, safety, durability, and performance, these portable column lifts are engineered exclusively for the
- Exact manufacturer model or part number: 5175293-V001
- Cataloged for Lifts & Hoists: Car Lifts — 4 Post Lifts – Heavy-Duty
- 4 product manual or technical documents linked below
- Condition: New
Product Specifications
| Brand | BendPak |
|---|---|
| SKU | 5175293-V001 |
| MPN / Model | 5175293-V001 |
| Condition | New |
| Division | Lifts & Hoists |
| Primary Category | Car Lifts |
| Collection | 4 Post Lifts – Heavy-Duty |
Before You Order
Confirm that model 5175293-V001, the listed capacity or working range, power requirements, dimensions, and site-delivery needs match your application. Only specifications stated in this listing should be used for purchase planning.
Manuals & Technical Resources
Need more technical details or compatibility information? Contact our team and we will help you find the right fit.
