Product Overview
Challenger VLE10 Versymmetric® ALI 2 Post Car Lift 10,000 lbs
Supersedes LE10
The Challenger VLE10 delivers the ultimate flexibility for any automotive service bay with patented Versymmetric® technology allowing you to perform both symmetric and asymmetric lifts with a single unit. Since 1992, Challenger® has pioneered this innovative design, combining the best of both lifting styles to maximize efficiency, save space, and accommodate virtually any vehicle from compact cars to full-size trucks. Whether you're running a high-volume shop or optimizing limited bay space, the VLE10 adapts to your workflow with ALI-certified safety and 10,000 lbs capacity.
Any Vehicle. One Bay. Unmatched Versatility.
Challenger Lifts' Versymmetric® technology brings unparalleled flexibility to any service bay while ensuring the safe lifting of any vehicle. This innovative design combines symmetric and asymmetric lifting capabilities into a single, robust platform. You can safely accommodate vehicles ranging from compact passenger cars to full-size trucks — all using the same heavy-duty columns and arms in one service bay.
The 3-stage Versymmetric® front arms and 2-stage rear arms provide an exceptionally wide arm sweep, enabling you to position vehicles asymmetrically for easy door access during passenger car service, or symmetrically for trucks and loaded vehicles where balanced weight distribution is critical. This means you can service a wide range of vehicles — from sports coupes to work vans — all from the same bay, maximizing your shop's productivity and eliminating the need for multiple dedicated lifts.
Whether you're looking for efficiency, versatility, or are simply short on space, the Challenger VLE10 is the right choice for your shop.
Direct Spot Technology™ & Intelligent Arm Design
Challenger's exclusive Versymmetric® Technology, featuring a 3-stage offset front arm design, allows for the safe symmetric lifting of trucks or asymmetric lifting of smaller vehicles within the same service bay. The innovative arm geometry provides exceptional reach and positioning flexibility: front arms extend from 22.3125" to 39.375", while rear arms reach from 38.375" to 55.375", giving you precise control over vehicle placement.
Direct Spot Technology™, enabled by the Versymmetric® offset arm design, allows you to save valuable time when spotting short wheelbase vehicles. You'll eliminate the frustrating struggle of aligning lift points with tires — the arms position naturally and intuitively for faster, safer vehicle setup.
Visualize the Difference: A standard passenger car lifts best asymmetrically, positioning the vehicle slightly rearward to allow the technician easy access to the car's interior and cabin. Conversely, a truck with a potential load in the bed lifts best symmetrically — the front arms position forward, distributing the weight evenly between the two columns for optimal balance and safety. With Versymmetric® technology, both methods are seamlessly possible in one bay, one lift.
Key Features & Performance Highlights
- 10,000 lbs lifting capacity with ALI certification for professional-grade safety and reliability
- 11.875" standard height fits service bays with 12-foot ceiling height, or choose the extended height model for 14-foot ceilings
- Jacketed pulley-less single-point mechanical lock release system once exclusive to Challenger's premium CL series lifts, now standard on the VLE10
- Double telescoping screw pads with rubber foot pads for secure, non-slip vehicle contact
- Padded overhead shut-off system prevents vehicle damage by cushioning contact and automatically stopping lift travel
- Rubber door guards protect vehicles from accidental door contact with lift columns
- Premium powder coat finish and plated arm restraints and pins inhibit rust and provide long-lasting durability in demanding shop environments
- 44-second rise time with a powerful 2HP motor (208v-230v, 60Hz, 1Ph) for fast, efficient operation
- 74.75" rise height with screw pads at highest position, providing ample working clearance
- 98.375" drive-thru clearance between columns for easy vehicle positioning
California Prop 65 Warning: Proposition 65 requires warnings on products that contain certain metals/chemicals that the State of California has determined may cause cancer and/or birth defects or other reproductive harm, if those products expose consumers to such chemicals above certain threshold levels that are designed to protect public health. For more information go to
Product Features
- 3-Stage Versymmetric ® front arms and 2-Stage rear arms provide a wide arm sweep for asymmetric and symmetric lifting in the same service bay.
- 11.875” standard height fits in service bays with 12’ ceiling height.
- Double telescoping screw pads with rubber foot pad.
- Padded overhead shut-off system prevents vehicle damage.
- Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL series lifts are now standard on the VLE10.
- Rubber door guards protect vehicle from door damage.
- Premium powder coat finish provides long-lasting durability.
- Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
Supersedes LE10
Product Specifications
Specifications
VLE10
Lift Capacity 1
10,000 lbs. (4536kg)
A Rise Height (Screw Pads at Highest Position)
74.75”
B Overall Height
Standard: 143.875” / Extended Height: 167.875
C Overall Width
131.625”
D Drive-Thru Clearance
98.375”
E Floor to Overhead Switch
Standard: 137” / Extended Height: 161
F Front Arm Reach
22.3125” – 39.375”
G Rear Arm Reach
38.375” – 55.375”
H Screw Pad Height
4.25” / 6.75”
I Inside of Columns
110.25"
Rise Time 2
44 seconds
Ceiling Height Required
Standard: 12’ / Extended Height: 14’
Motor / Voltage
2HP / 208v-230v, 60Hz, 1Ph
1 Lift capacity ratings are based on loads equally distributed on all four arms.
2 Lifting and lowering speeds may vary depending on the weight of the vehicle.
Key Features
- Published product configuration: Challenger VLE10 Versymmetric® ALI 2 Post Car Lift 10,000 lbs Supersedes LE10 The Challenger VLE10 delivers the ultimate flexibility for any automotive service bay with patented Versymmetric® technology allowing you to perform both symmetric and asymmetric lifts with a single unit. Since 1992, Challenger® has pioneered
- Exact manufacturer model or part number: VLE10-V001
- Cataloged for Lifts & Hoists: Car Lifts — 2 Post Lifts
- 2 product manual or technical documents linked below
- Condition: New
Product Specifications
| Brand | Challenger |
|---|---|
| SKU | VLE10-V001 |
| MPN / Model | VLE10-V001 |
| Condition | New |
| Division | Lifts & Hoists |
| Primary Category | Car Lifts |
| Collection | 2 Post Lifts |
Before You Order
Confirm that model VLE10-V001, the listed capacity or working range, power requirements, dimensions, and site-delivery needs match your application. Only specifications stated in this listing should be used for purchase planning.
Manuals & Technical Resources
Need more technical details or compatibility information? Contact our team and we will help you find the right fit.
