Product Overview
BendPak LR-10000 Low-Rise ALI Lift 10,000 Capacity
The BendPak LR-10000 is the top-selling low-rise lift for professional technicians and serious home mechanics who demand the best. Engineered with four parallelogram frame support bars on each platform, it's the strongest 10,000-pound low-rise lift in its class. Perfect for wheel service, brake jobs, oil changes, suspension work, and detailing, this ALI-certified lift handles everything from low-slung sports cars to hefty trucks and SUVs with ease. With a remarkably low 4.5" collapsed height and a compact footprint of 85" wide by 82.65" long, the LR-10000 delivers commercial-grade performance without overwhelming your workspace.
Work Faster with the Top-Selling LR-10000 Low-Rise Lift
When you need to get wheel service done quickly, there's no substitute for the LR-10000. This amazingly efficient low-rise lift holds up to 10,000 lbs. and is perfect for trucks and SUVs that many other lifts can't handle. The dual hydraulic cylinders provide a stable, evenly distributed lifting capacity across a wide range of vehicles, ensuring your heaviest jobs are handled with confidence.
Lug nuts and other small parts are always within reach thanks to the convenient built-in storage trays on each side of the lift platform. No more searching for misplaced parts mid-job. The lift's compact footprint, easy installation, and adaptable 110V or 220V power unit make the LR-10000 the perfect lift that fits any shop—from busy commercial facilities to home garages with limited space.
The full-length rubber-topped lifting platform and eight multi-height rubber-topped adapters allow safe lifting of most unibody and frame-contact undercarriages at recommended manufacturer pick-up points. Diamond-plated approach ramps with drive-over rails increase width to support wider vehicles during approach and help prevent slipping. Be sure to compare your vehicle specifications, including ground clearance and overall height, with the specifications shown before you purchase.
Low-Profile Height for Maximum Versatility
A low 4.5" collapsed height accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs. The minimal garage footprint means you can collapse your car lift without it getting in your way. This is perfect for home garages that want to reduce clutter in a tight space. When you need working height, the LR-10000 raises to a full 23" of lift or 32" with included blocks with five locking positions (14", 18", 20.75", 22.75", and full 23") so you can work comfortably and safely at the height that suits your task.
Single-Point Safety Release for Easy, Safe Operation
The single-point safety release and dead-man style operation controls make this lift easy to operate and safe to use. The release during descent is instantaneous, smooth, and perfectly level every time. Safety is built into every detail, from the industrial-grade hydraulic cylinder with flow divider that ensures even ascents and descents, to the durable powder coat finish that stands up to years of heavy use. Every lift includes detailed installation and maintenance instructions, graphic safety decals, maintenance decals, a vehicle lifting point guide, and a safety instruction placard to train personnel on proper procedures.
Dropped Crossbar for Superior Clearance
A specially formed crossbar is dropped in the center, providing added vehicle drive-over clearance. Now suspension work, oil changes, wheel and brake service, and detailing are easier than ever. You'll have full access to undercarriage components without awkward angles or repositioning the vehicle.
Built BendPak-Tough: Rugged Steel Channel Frame
If you're going to do heavy lifting, you need a solid base. BendPak steel is manufactured under the strictest industry standards. The same warranty that applies to BendPak's larger lifts applies to their low-rise lifts. Each platform features four parallelogram frame support bars, making it the strongest and most rigid 10,000-pound low-rise lift available.
Industrial-Grade Hydraulic Cylinder with Fast Cycle Time
A durable, leak-proof hydraulic cylinder with flow divider ensures even ascents and descents with every use. This is the same cylinder technology that supports all BendPak lift designs. In BendPak's philosophy, low-rise lifts deserve the same rugged equipment as any other car lift. With a fast 35-second lifting time, you'll spend less time waiting and more time working.
Solid Rubber Lift Blocks Included—No Hidden Costs
Others charge extra for these necessary adapters, but they're standard with every LR-10000 purchase. There's no point in having your car lift installed without all the pieces needed to operate it. The LR-10000 comes standard with eight multi-height rubber-topped adapters for increased vehicle contact versatility. Only use BendPak's durable treaded rubber lift blocks when operating this lift—they're more supportive and longer-lasting than many competing lift blocks. Some companies use flimsy rubber padding on their low-rise lifts, which rips and tears during use. BendPak doesn't cut corners.
Key Highlights of the BendPak LR-10000
- 10,000 lbs. total capacity ( 5,000 lbs. per axle ) for trucks, SUVs, sports cars, and everything in between
- Low 4.5" collapsed height accommodates low-clearance vehicles and saves shop space
- 23" full rise (32" with blocks) with five locking positions for ergonomic work heights
- Four parallelogram frame support bars per platform the strongest design in its class
- Fast 35-second lift cycle keeps productivity high and wait times low
- 110V single-phase power easy to install in any shop or garage
- ALI-certified for safety and compliance with industry standards
- Built-in storage trays keep lug nuts and small parts organized during service
- Diamond-plated approach ramps and drive-over rails for safe, slip-resistant vehicle loading
Product Features
- Each lift platform features four parallelogram frame support bars making it the strongest 10,000-pound low-rise lift in its class
- Drive-over ramps and side rails provide an increased width to support wider vehicles during approach
- Comes standard with a durable full length rubber-topped lifting platform and eight multi-height rubber topped adapters for increased vehicle contact versatility
- Storage trays are conveniently placed on each side of the lift platform to prevent wheel lug nuts and other small parts from being misplaced
- Dual hydraulic cylinders provide a stable 10,000-pound lifting capacity to accommodate a wide range of vehicles
- Diamond plated approach ramps help to prevent slipping
- Thee locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
- Powder coat finish provides a long lasting durable finish
- Included with every lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines
Product Specifications
Specifications
LR-10000
Capacity
Lifting Capacity
10,000 lbs. / 2,724 kg
Max Capacity / Front Axle
5,000 lbs. (2,273 kg)
Max Capacity / Rear Axle
5,000 lbs. (2,273 kg)
Rise
Lifting Height
23" (584 mm)
Lifting Height w/Blocks
32” (813 mm)
Locking Heights
Fully Lowered
4.5" (114 mm)
1st Lock Position
14" (356 mm)
2nd Lock Position
18" (457 mm)
3rd Lock Position
20.75" (527 mm)
4th Lock Position
22.75” (578 mm)
Full Rise
23" (584 mm)
Outside Dimensions
Overall Length
82.65" (2,094 mm)
Overall Pad Length
53” (1,346 mm)
Overall Width
85" (2,159 mm)
Overall Pad Width
24" (610 mm)
Lowered Height
4.5" (114 mm)
Power Unit
Motor
110 VAC / 50/60 Hz / 1 Ph
Lifting Time
35 Seconds
Shipping
Shipping Weight
1,332-lbs. (604 kg)
Shipping Dimensions
88" x 85" x 24 (2,235 mm x 2,159 mm x 609 mm)
Key Features
- Published product configuration: BendPak LR-10000 Low-Rise ALI Lift 10,000 Capacity The BendPak LR-10000 is the top-selling low-rise lift for professional technicians and serious home mechanics who demand the best. Engineered with four parallelogram frame support bars on each platform, it's the strongest 10,000-pound low-rise lift in its class
- Exact manufacturer model or part number: 5175232
- Cataloged for Lifts & Hoists: Car Lifts — Specialty Lifts
- 1 product manual or technical document linked below
- Condition: New
Product Specifications
| Brand | BendPak |
|---|---|
| SKU | 5175232 |
| MPN / Model | 5175232 |
| Condition | New |
| Division | Lifts & Hoists |
| Primary Category | Car Lifts |
| Collection | Specialty Lifts |
Before You Order
Confirm that model 5175232, the listed capacity or working range, power requirements, dimensions, and site-delivery needs match your application. Only specifications stated in this listing should be used for purchase planning.
Manuals & Technical Resources
Need more technical details or compatibility information? Contact our team and we will help you find the right fit.
